Aquagym Swim Spa

13' x 7'6" x 4'3"
1506 Gallons
Weight (full)
14892 lbs
Up to 59
Spec Sheet

Quality, luxury & comfort for up to 3 adults

Free Delivery
12 months interest free
60 day money back guarantee
6 colour combinations
Timber free Permaframe construction
Lifetime structural ‘no rot’ warranty
Premium Balboa control system
Childproof lockable hardcover
Purezone water filters (3+1 micro)
Ozone water clarifier

Is the Aquagym for you?

The Aquagym is where the Vortex swim spa experience begins. This is a compact, single zone swim spa that still has room for all the usual bells and whistles that are now synonymous with Vortex swim spas.

The Aquagym has three comfortable hydrotherapy seats, up to 59 jets, up to four high volume swim jets and 4 pumps. After a swimming work-out you can relax in the spa and choose from a back massage seat, a neck and shoulder massage seat or the often used cool down seat. The corners at the swim end also offer standing back massages to speed recovery from intense training sessions. The Aquagym swim spa is the ideal way to combine personal training with total relaxation.

Aquagym seat layout

Seats 3 adults in the most compact Vortex
swim spa available.

Seating for up to 3 adults

The Aquagym comfortably seats three adults. The seating arrangements in the Aquagym include a back massage seat, a neck and shoulder therapy seat and a cool down seat that provides a welcome and refreshing space during your hydrotherapy sessions. While the corners at the swim end also offer standing back massages to speed recovery from intense training sessions.

Our most compact swim spa, perfect when space is limited.

The Aquagym is our most compact swim spa. Measuring only 13' by 7' 6" it is the perfect solution for those who want a fully featured swim spa but have limited space.

1 back massage seat

Whether it's lower, middle or upper back the back massage seat in the Aquagym is designed to reach the entire area. At one time or another, most of us experience discomfort or a tight back, this is where the Aquagym excels and allows you to just sit back and relax. Proving this swim spa is not just for exercise.

1 shoulder and neck therapy seat

If you feel stress and tension in your shoulders, you'll love the shoulder and neck therapy seat in the Aquagym. Four massaging jets are embedded within the therapy collar, combine this with the seat jets and you have a sublime hydrotherapy massage that focuses on your problem area. Perfection.

1 cool down seat

The Aquagym has a cool down seat, it sits higher than the other seats and helps keep your body temperature nice and consistent during a full hydrotherapy session. The cool down seat is also suitable for families with young children, so any 2 - 5 year olds can enjoy the spa without having to sit on an adults lap.

2 standing / corner back massage zones 

We realise that the 2 back massage corners are NOT seats as such. But, they both offer relaxing hydrotherapy sessions for before, after, or even during your serious and strenuous workouts. Back massage corners are available on the Aquagym Extreme model.

Aquagym Gallery

The perfect temperature, all year.


Aquagym Jet Layout

Aquagym Pro

Standard jets

  • 2 x 6" High Volume Swim Jets
  • 2 x 5" Directional Spinning Jets
  • 3 x 5" Single Spinning Jets
  • 2 x 3" Directional Jets
  • 24 x 2" Directional Jets
  • 4 x 2" Twin Spinner Jets

Jet Types

Your perfect training partner.


Relax and unwind.

Light everywhere

Vortex Spas Hydroglow lighting system has become the envy of all others. Our innovative use of LED has changed the way spa pools are being lit. Now, thanks to Hydroglow it's very easy to have your swim spas light match your colourful personality.

Meet the Vortex Hydroglow family

Hydroglow Jets

One of the first frustrations we had with traditional spa lighting was the fact it was one big light. When what we really wanted was a sparkle of light everywhere. We wanted to create ambiance, without it being too bright. By making each jet core translucent we were able to backlight it with multi-coloured, attractive LED lighting. This idea started the Vortex Spas light revolution, bringing just the right light to everywhere.

Waterline lights

These lights form a ring around the waterline to give a fairylight effect and sparkle. Your soft, twinkling light is colour synced to the hydroglow family.

Backlit topside controls

The controls need to be seen in the dark. By applying the same translucent component idea to the controls, we found a way to make them not only pretty, but easy to see.

Backlit laminar jets

Our backlit laminar water jets create a continuous unbroken stream of water that creates no splash or noise. Be the envy of your neighbourhood with this beautiful and totally mesmerising water feature.

Non-slip backlit cup holder

It’s important to stay hydrated while in your spa. Our backlite coasters illuminate your drink and help reduce accidental spills. Included in Avante upgrade.

Illuminated water feature

There is nothing more relaxing than the sound of running water. Add a touch of light and you have created the perfect sanctuary to be rested and mindful.

LED flood light

Our powerful LED flood light does the heavy lifting to illuminate your spa at night. This leaves the other lights to add ambience to all the right places.

Step lights

Getting in and out of a spa in the dark can be a hazard. The Vortex Hydroglow step lights are strategically placed above the steps for clear visibility without killing the mood.

Entertain friends and family.

Additional Features

Additional features

Vortex swim spas are packed with industry leading features. Take a closer look and see for yourself why
Vortex Spas are the best value, high quality swim spas available anywhere in the world.

Twin Laminar Jets

Tranquil and beautiful. The laminar jets smooth and uninterrupted flow of
water is both relaxing and mesmerising. It's also a 'splash-free' feature.

Jet pressure controllers

Conveniently located to be adjusted while in your swim spa.
Our jet pressure controllers allow you to ‘dial up’ your desired jet intensity
so you can maximise relaxation and hydrotherapy.

Easy in, easy out

We’ve made getting in and out of your swim spa simple and safe.
Easy as that. Avoid the risk of falls and slips by adding our
maintenance free colour matched steps to your package.
Practical and affordable.

Crystal clear water

Minimal chemicals, maximum comfort

Protect your family from unnecessary and potentially harmful chemicals.

Vortex swim spas feature advanced water treatment technologies that work together in tandem with a light chemical boost to keep your water crystal clear and healthy.

The Purezone clean water system

Purezone Micro Filtration

Purezone Ozone Water Clarifier

Purezone Micro Filtration

The starting point of any effective water treatment system is to remove water borne contaminants. So it makes perfect sense to filter out as many contaminants as possible.

Conventional paper cartridges trap particles as small as 50 microns (50/1000th of a millimetre). The Purezone Micro Filtration is 10 times more effective, trapping particles an incredible 5 microns (5/1000th of a millimetre).

Purezone Ozone Water Clarifier

Ozone clarification is a proven technology that has been used for decades to automatically clarify spa and pool water. It was created as an alternative to chemical clarifiers. But used incorrectly, ozone can be rendered ineffective or at worst, damage the components of your spa.

Vortex has taken ozone technology to the next level by linking it with a unique mixing chamber, which increases the ozone's contact time with the water. This ensures maximum effectiveness and eliminates the possibility of damage to your swim spa.

Childs play, all day.

Good for your budget, great for the planet

High on features, low on running costs

We believe a spa should fit your budget, not take ALL your budget. That is why we have designed your Vortex swim spa to operate efficiently and effectively with minimal heating and cleaning costs

The Vortex temperature control system

Green Technology

Vortex are in sync with todays' green electronic technologies. We take advantage of smart meters. These react and recall your behaviour, they then tune to the most efficient daily operating procedure for you. 

Premium Insulation

All Vortex spas feature perimeter insulation that's designed to minimise heat loss. Optional insulation packs can be added that will increase the overall efficiency of your swim spa.


High density foam locking cover

Every Vortex Spa comes with a custom fitted, high density foam locking cover.

Heat rises, so it makes sense to get the very best insulation on the top of your spa. Your Vortex high density foam cover locks onto your spa. This seals the heat in along with the added safety of keeping the kids out!

Built to withstand 80kgs of weight and made from ultra UV resistant vinyl and high density foam. When looked after it will give you years of exceptional service.

Perimeter insulation

The Vortex perimeter insulation system has two features that make it superior to the traditional ‘foam on shell’ spa insulation system.

First, by insulating the cabinet instead of the shell, Vortex spas recycles lost heat from the pumps and equipment, it also insulates the plumbing that would otherwise lose heat to the environment. This results in less overall heat loss and therefore, lower running costs.

And secondly, by placing the insulation between the spa's pumps and you, you'll enjoy a quieter, more tranquil and restful spa experience.

Arctic pack

The Vortex Arctic pack increases the perimeter insulation to 50mm. This system offers the ultimate level of insulation and is extensively used on Vortex Spas sold in regions with extreme climates such Scandinavia and Canada.

Dual layer insulation

The Vortex dual layer insulation covers both the outer cabinet and the shell. This is the most efficient way to insulate. It traps air and uses the same principles as those utilised by modern double glazed windows.

Vortex dual layer system keeps the heat from the pumps and plumbing, reduces noise and provides a warm layer between the water and the outside of the spa. Adding the optional dual layer insulation adds a higher level of heat retention than the standard Perimeter insulation.


Vortex means quality

Guaranteed to last so you can relax

We focus on quality. From the initial design and construction process, through to every individual swim spa leaving our factory. This focus allows us to confidently stand behind every swim spa we make. Our warranties are the envy of the spa industry.

Structural shell warranty

Unbelievably, most spa pool structural warranties are pro-rata. This means they reduce in value as the spa ages. Leading to hefty costs if your spa's shell structure fails in the latter part of it's warranty.

Vortex Spa's structural warranty is non pro-rata. So if your swim spa's shell structure fails anytime within the 10 year warranty, we replace it. No questions asked.

Acrylic surface warranty

All Vortex swim spa's are offered with a 5 year 'non pro-rata acrylic surface warranty. Our high quality acrylic surface warranty guarantees against any surface blisters that result in water loss for five years.

Vortex Spa's structural warranty is non pro-rata. So if your swim spa's shell structure fails anytime within the 10 year warranty, we replace it. No questions asked.

Jet warranty

Whilst it is possible to produce the spa's jets and other plastic components using a quantity of reused plastics, it is difficult to guarantee their fundamental quality. 

Vortex Spa jets are produced using the highest grade 'virgin' plastics. This ensures the longest possible life span. This is why we can give you an industry leading, 5 year jet replacement warranty.

Plumbing & heater warranty

The plumbing system of all Vortex swim spas is warranted against leaking for 5 years.

The heater is also warranted against defects for a period of 5 years.

Pump & equipment warranty

The circulation pump, jet pump(s) and electronic control system of all Vortex swim spas are warranted against defects for 2 years.

*For full warranty details please contact your local store. Find Vortex Spa's closest store here.

Aristech acrylic

Isn't is nice to know that your Vortex swim spa is made out of the best acrylic available. Our acrylic is made in the USA by Aristech. 

Rest easy knowing your swim spa's acrylic is manufactured to handle the weather extremes.

Tough steel framework

All Vortex swim spa frames use top quality, durable steel. This is because a steel structure retains its integrity and requires minimal on-going maintenance. 

Wooden batons are strategically placed within the framework to assist where fastening is required.

Thermabond 4 layer shell construction

At the heart of any quality swim spa is a quality spa shell. After all, whilst pumps and other equipment can be replaced, the swim spas shell cannot.

For this reason, Vortex Spas use a 4 layer, 8 step Thermabond lamination process not found in most swim spas. This process includes the curing of the shell in a temperature and humidity controlled oven. This is absolutely vital if the shell of the swim spa is to last the lifetime of ownership.

Thermaclad cabinet

Because Thermoclad is produced using a UV resistant polymer, with the exception of a regular hose down, Thermoclad requires no maintenance. Contrast this to natural timbers which must be stained on a regular basis, Thermoclad is a great time saving alternative.

Due to the hot, damp environment that occurs around a swim spa, even the hardiest of timbers will be susceptible to mold and mildew. As a synthetic material, this will not be the case with your Thermoclad cabinet.

Hydroflow bearing-less jets

Vortex swim spas come with a 5 year jet warranty. Our Hydroflow jets last and last because our they have no bearings to fail. This makes them extremely reliable even under heavy use.

Duraflex plumbing

Nobody wants a leaking swim spa! Vortex Spas are plumbed using Duraflex flexible PVC plumbing, which is specially designed for use in high performance swim spas.

Duraflex incorporates a coil of rigid PVC within it's walls that allows the piping to flex but not kink. This ensures equal pressure to every jet whilst avoiding rigid right angle joints that can reduce hydrotherapy pressure.